 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2.0x1.25mm SMD CHIP LED LAMP AP2012SEC SUPER BRIGHT ORANGE Features 2.0mmx1.25mm SMT LED,1.1mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Description The Super Bright Orange device is made with DH InGaAlP (on GaAs substrate) light emitting diode chip. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD0937 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/11/2005 DRAWN: Y.W.WAGN PAGE: 1 OF 4 ERP:1203000159 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AP2012SEC SUPER BRIGHT ORANGE (InGaAlP) WATER CLEAR 70 Typ. 200 Viewing Angle 21/2 120 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol peak D 1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Typ. 610 601 29 30 2.0 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Orange 75 30 195 5 -40C To +85C Units mW mA mA V SPEC NO: DSAD0937 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/11/2005 DRAWN: Y.W.WAGN PAGE: 2 OF 4 ERP:1203000159 Super Bright Orange AP2012SEC SPEC NO: DSAD0937 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/11/2005 DRAWN: Y.W.WAGN PAGE: 3 OF 4 ERP:1203000159 AP2012SEC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAD0937 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/11/2005 DRAWN: Y.W.WAGN PAGE: 4 OF 4 ERP:1203000159 |
Price & Availability of AP2012SEC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |